Cone crusher is one of the essential equipment in the sand and gravel production line, and often plays the role of secondary crushing in it. So how should cone crusher be used and operated?The following Xiaobian will introduce it to you in detail：
The first is the preparation before the start of the cone crusher：
Before starting the cone crusher, check whether all screws and spring screws of the equipment are fastened, and whether there are debris around the crusher equipment.Secondly, check whether there are materials or debris in the crushing chamber of the cone crusher, and clean up the crushing chamber.Finally, check the tightness of the triangle belt of the belt conveyor and check whether the lubricating oil in the bearing seat is appropriate.
Secondly, when the cone crusher starts,：
After checking the preparations before the start of the cone crusher, start the motor after sending a signal in accordance with the start-up requirements. When starting, pay attention to the safety of surrounding personnel and take protective preparations.
Then there is the operation of the cone crusher：
The cone crusher is operated without load for a period of 1 to 2 minutes. It can be fed after normal operation. It should be fed continuously and evenly. It is strictly forbidden for other materials and debris that cannot be broken to enter the crusher to prevent damage to the crushing equipment and cause accidents.
During the operation of the cone crusher, any adjustment, inspection, cleaning and other work are prohibited to avoid danger.When the temperature of the bearing exceeds 70℃, it should be stopped immediately, the cause should be identified and properly dealt with, and it can be restarted after treatment.
Finally, the cone crusher stops：
First stop the feeding, let the cone crusher continue the crushing work, and then stop the cone crusher until the remaining materials in the crushing chamber are processed.After the material on the discharge transport aircraft is transported, the discharge transport aircraft can be stopped.
The above explains the use and operation of cone crushers. Even if a good cone crusher is not used correctly, the work efficiency will be greatly reduced. If the cone crusher is noisy during the use of the cone crusher, it may be improper operation, so Henan Liming Heavy Industry Company hereby reminds the majority of users to standardize the production and operation of cone crushers in accordance with production requirements.At the same time, the adjustment of the feed and discharge ports of the cone crusher also directly affects the output of the cone crusher.In short, it is necessary to rely on the correct operation of the cone crusher technician to use and use the cone crusher well.