High-quality washed sand has greatly improved the application value of the material. Compared with quartz sand, the cost is lower, especially in the construction industry. It has the advantages of good construction fluidity and stable quality. It can be better used in all walks of life. At the same time, it also alleviates the shortage of high-quality sand and gravel aggregates. It is a hot-selected material in the past two years and is widely loved by major sand and gravel farms.What equipment should be used for processing washed sand?How to configure the production line with a hourly output of 300 tons of washed sand?
Which equipment is better to use for washing sand
In the mining equipment market, wheel-and-bucket sand washing machines and spiral sand washing machines can carry out sand cleaning operations. Which one is better to choose?It mainly depends on the actual production demand.
- Wheel bucket type sand washing machine.There is less loss of fine sand and high cleanliness. After cleaning, the sand and the machine are combined with the grid, the processing capacity is large, the structure is simple, easy to use, the footprint is small, and the cost is low.It is more suitable for the selection and investment of small and medium-sized gravel farms.
- Spiral sand washing machine.The loss of fine sand is large, it looks relatively clean to wash, it works reliably and is easy to operate. It integrates dehydration, desilting, and particle size control. The sorting and washing effect is good, and the investment cost is higher than that of a wheel-and-bucket sand washing machine.It is more suitable for the purchase of large and medium-sized gravel farms.
Configuration of 300 tons of washed sand production line per hour
The main equipment composition of the 300-ton washed sand production line is：
GZD1300×4900 feeder, PE900×1200 counter-breaking, PFW1315 European version counter-breaking, 3YZS2460 vibrating screen, 5X1145 sand making machine, 3YZS2460 circular vibrating screen, sand washing machine, belt conveyor, etc.
The process flow of the production line with a hourly output of 300 tons of washed sand is: The stone is blasted down from the mountain, and the stone less than 750mm is fed into the vibrating feeder by a dump truck. The vibrating feeder evenly feeds the stone into the jaw crusher. The jaw crusher crushes the stone for a period of time. The stone that comes out of the jaw is about 95mm—165mm. It is fed into the European version of the counterattack through a belt conveyor for two-stage crushing, and the material greater than 40mm is returned to the counterattack and re-broken through a circular vibrating screen. The stone below 40mm is broken again. It is fed into the sand making machine, and finally, the material is graded and sieved through a circular vibrating screen. The material larger than the finished product is returned to the sand making machine for re-crushing, and the finished product is transported by the belt conveyor to the finished product area.
The main thing to note is that when the feed is 40mm-300mm, the material directly enters the European version of the counterattack crushing, without the previous section of crushing, when the material is less than 40mm, it directly enters the sand making machine for crushing, without the previous section of crushing and the second section of crushing.
As a large-scale direct sales manufacturer of mobile crushing equipment in Henan, which mainly focuses on the low- and middle-level consumer market, the equipment prices given by Liming are all factory prices. As for the price of Liming sand washing equipment after the discount, how much is the price of one?For more information, you can call or leave a message and click to consult a preferential quotation. Liming staff will answer your questions 24 hours a day!