Basalt crusher is a commonly used mining equipment used to break basalt raw materials into the required particle size.In order to ensure the long-term stable operation of the equipment, correct operation and maintenance are essential.This article will introduce how to properly operate and maintain the basalt crusher to extend its service life and improve production efficiency.
How to operate the basalt crusher correctly
1.Prepare before startup：
(1) Familiar with the operation manual: Before operating the basalt crusher, be sure to read and understand the operation manual in detail.The manual contains all important information about the equipment, including operating procedures, safety precautions, troubleshooting, etc.
(2) Check the status of the equipment: Before starting the basalt crusher, please make sure that the equipment is connected to the power supply correctly and that all safety devices have been installed normally.At the same time, check whether there are foreign objects in the crushing chamber to ensure that the crushing chamber is clean.
2.Material placement: Ensure that the basalt material put into the crusher meets the specified size and type, and put the basalt raw material evenly into the crushing chamber to avoid putting too many materials at once.The delivery of materials should be evenly distributed to avoid excessive congestion or no-load operation.
- Adjust the particle size: According to the required particle size, adjust the particle size adjustment device of the crusher.The desired particle size is achieved by adjusting the gap between the grate joints or adjusting the position of the broken plate.
4.Operation monitoring: During the operation of the crusher, the operating conditions of the equipment, including noise, vibration, temperature, etc., should be closely monitored.If an abnormal situation is found, it should be stopped immediately for inspection and appropriate measures should be taken to solve the problem.
5.Shutdown operation: When the crushing task is completed, the equipment should be shut down in the correct shutdown order.First, stop the feeding device, and then turn off the crusher after all the materials in the crushing chamber are discharged.
The importance of maintaining basalt crushers
1.Regular inspection: Conduct a comprehensive inspection of the basalt crusher on a regular basis, including the wear and tear of vulnerable parts such as the crushing plate, grate joints, and transmission belts.If a problem is found, it will be repaired or replaced in time.
2.Cleaning and maintenance: Regularly clean up the dust and foreign objects in the crusher and keep the inside of the equipment clean.Regularly check the lubrication system of the equipment to ensure that the quality and quantity of lubricating oil meet the requirements.Replace worn lubricating parts in time to prevent equipment from being damaged due to poor lubrication.
- Fastener inspection: Regularly check the fasteners of the equipment, such as screws, nuts, etc., to ensure that they are in a fastened state.For loose parts, they should be fastened or replaced in time.
- Electrical system inspection: Regularly check the electrical system of the crusher, including power cords, switches, protection devices, etc.Ensure the normal operation and safety of the electrical system.
5.Check the blade wear: The blade is a key component of the basalt crusher, and its wear directly affects the crushing effect of the equipment.Check the wear and tear of the blades regularly, and replace the blades with severe wear and tear in time.
6.Check the conveyor belt regularly: The conveyor belt is an important part of the crusher and is responsible for transporting basalt materials to the crushing area.Regularly check the tensioning and wear of the conveyor belt to ensure the normal operation of the conveyor belt.
7.Make equipment records well: establish equipment maintenance records, and record in detail the status of each maintenance and repair, including the replaced parts, the time of repair, etc.This is very helpful for discovering and solving equipment problems in a timely manner, as well as predicting the maintenance cycle of equipment.
The correct operation and maintenance of the basalt crusher is the key to ensuring the long-term stable operation of the equipment.By following the above operating methods and maintenance measures, the service life of the equipment can be extended, production efficiency can be improved, and the safety of the production process can be ensured.