For example, the plan that can be configured for large raw materials is: jaw breaking + cone/counter-breaking + vibrating screen + belt conveyor；
The configuration process of this set of sand and gravel production line is as follows: The stone enters the belt conveyor and is sent to the jaw break (head break) for processing, and the particle size is below 60mm. The particle size of the stone that meets the counterattack break/cone break/hammer break treatment needs to be sieved through a vibrating screen. The particle size of the stone that meets the counterattack break/cone break is then sent by the belt conveyor to the counterattack break/cone break for secondary fine crushing, so that the broken stone can almost meet the requirements of building stones. In order to improve the yield of mechanical sand and gravel, it is necessary to go through the vibrating screen again to screen out the finished stone with uniform particle size, and the stones with larger particle size are carried out again. It can be processed in the secondary crusher until the requirements are completed.
For example, the small configuration plan of raw materials: hammer breaking + vibrating screen + belt conveyor
The main process: The stones are sent directly to the hammer for crushing through the belt conveyor of the raw material warehouse. Two or three particle sizes of stones can be broken. Then according to the production needs, the qualified stones need to be sieved through a vibrating screen, and the unqualified stones are returned to the crusher for re-crushing. This process requires the use of a vibrating screen and a belt conveyor as an intermediate conversion, and the hammer is used as the main crusher, eliminating the need for at least two equipment for processing fine sand and stones.
How much is the equipment for processing fine sand and stones?
In the equipment for processing fine sand and stones, the price of cone breaking is higher. Because cone breaking is complicated to manufacture and requires high processing standards, the price is a bit higher than counter-breaking and hammer breaking, but its wearing parts have a long life span, avoiding the trouble of frequent replacement of parts; Some customers ask how much is the equipment for processing fine sand and stones?In fact, according to the different processing scale, output, and finished product discharge requirements of customers, the selected equipment configuration is different, so the price of the equipment for processing fine sand and stones is high or low. If you have a specific quotation for the equipment for processing fine sand and stones, you can get it for free by clicking on the online customer service.