There are many reasons for the low output of the cone crusher, such as the hardness, humidity, fineness of the materials to be crushed, etc. There are also some low output caused by the quality problems of the equipment itself.
Because the conditions of the materials to be crushed are fixed, that is, the hardness and toughness of the materials are fixed, during the use of the cone crusher, the materials should be loaded according to the instructions of the equipment; if the humidity of the materials is too high, the inside of the equipment will easily adhere. , it is also easy to cause blockage during the material transportation process, resulting in low efficiency of the equipment. If the material is too wet, it should be dried first before crushing; the fineness requirement of the material after being ground is higher. High, the crushing capacity of the cone crusher is relatively reduced, resulting in low efficiency. As for the malfunctions of the equipment itself, we need to find them one by one and solve them accordingly.
The wiring position of the cone crusher motor is reversed, which affects the work of the motor; the size of the discharge opening of the cone crusher is small, and the decrease in production output will also cause the discharge opening to be blocked, so the size of the discharge opening needs to be increased; cone crusher The displacement of the lining plate of the cone crusher will also affect the working status and efficiency of the equipment. It is necessary to ensure that the position of the lining plate is appropriate; after the cone crusher is used for a period of time, the wear of the lining plate structure and bearings will increase the working gap, and the bearings will Relative rotation occurs in the outer ring, which reduces the output. The wear status of the lining plate and bearing can be frequently checked and replaced in time.
The above is the relevant content about the reasons for the low output of the cone crusher. Customers are welcome to consult!